Vehiclelifting.com is reader supported. When you purchase through links on our site, we may earn an affiliate commission. Learn more.

The Best Jack for F150 In 2022 | Top 5 Models Reviewed

Getting out your lodged tire of a Ford F150 without the proper tool is unlikely if you get stranded and stuck on a muddy road with it.

Therefore, to tackle all these harsh situations, it is necessary to have a heavy-duty and portable car jack stored in your vehicle at all times. A high-quality portable jack will also ensure you can get out of such an ordeal without the help of a professional. This not only saves a lot of your time but even cuts down the cost of hiring any professionals.

So, here in this review, our automotive experts have shortlisted the best jack for F150 and how they aid your vehicle in different harsh situations.

Don’t have the time to go through the in-detailed reviews, check out the following summary to get a glimpse of our listed products.

“This is a lightweight jack capable of lifting more than 3000 pounds with ease and security of not dropping due to the counterweighted pawl locks. The dual-piston on it speeds up the process of raising the vehicle with the help of the strong handle that pushes down the lever to lift the car.”

“Jegs professional 3-ton aluminum floor jack is a beast of its kind. Capable of lifting to 6000 pounds with ease, this jack faces no difficulty lifting most trucks and vans. Because of its sheer power can easily be labeled as the best jack for Ford F150 and any other larger vehicles.”

"This larger-than-regular jack can help you in ways other jacks probably can't. Even though it is much heavier and more budget-friendly than most others, its aluminum-built quality ensures safety and security over all else. The security ratchet prevents any accidental unlocking of the base and provides maximum stability to the vehicle it is lifting. "

“It is a jack that guarantees maximum safety and security to the car it lifts. It is much heavier and more difficult to transport than other jacks available in the market. The durable material used and the hydraulic pistons used to make this jack are also top-quality.”

“Of all the other types of jacks available on the market, Ht3300 is the most durable kind that ensures satisfaction no matter what you use it for and how you sued it afterward. The steel material made enables it to withstand such loads of cars without causing any issues as a token of love.”

In-Depth Reviews of the Best 5 Jacks for F150 You Can Choose

Here in this section, we’ll give you an in-depth and detailed review of our listed jacks and how they stand out from the rest of the jacks on the market.

1. Best Overall: Arcan 3 Ton Aluminum Floor Jack

Arcan 3 Ton Aluminum Floor Jack
Key Specification:
  • Material: Aluminum
  • Load Capacity: 3 ton (6000 lbs.)
  • Product Weight: 56 pounds
  • Dimensions: 30 x 13.5 x 8 inches
  • Minimum Height: 11.62 inches
  • Maximum height: 17.5 inches
  • Piston Technology: Dual Piston
  • Color: Light Green and Ash

The Arcan 3-ton aluminum floor jack is made of solid aircraft material aluminum body. This 56 pounds floor jack is a perfect fit for large vehicles like the Ford F150.

It has a two-piece removable handle that makes it easier to carry around. The grip on the body also helps make it more portable and mobile, making transportation easier.

The dual-piston technology used in making it makes it highly powerful and capable of lifting a 3-ton weight quickly without any hiccup. The solid aluminum material is also used in making aircraft, which further ensures its capability and resonates with the ultra-weight lifting power.

This is a fantastic alternative to the hydraulic lifts and makes it much easier to work underneath the car. The lightweight feature also ensures maximum comfort while working underneath the vehicle and lifts maximum weight without any risk of being overloaded.

The dual pump piston on it makes the process of lifting the car much quicker. These pumps help speed up the process of raising the car twice as fast as the time it would take to lift using a jack of the same size with a single-pump piston.

Moreover, since the lift handle is used with quite a bit of force and at a varying pace, it would make sense to get damaged quickly. However, the reinforced handle keeps it safe and prevents any dent or bending on it.

Benefits of Arcan 3-Ton Jack:
  • Durable lift arm
  • Aircraft-grade material makes efficient and robustness
  • Improves chassis torsion
  • Dual-pump piston for rapid lifting
  • It comes with removable handles
  • Suitable for low profile vehicles
Downsides:
  • Twisting the lever counter-clockwise can be confusing to lowering the vehicle
  • Bulky in size


2. Best Lightweight: JEGS Professional 3 Ton Aluminum Floor Jack

JEGS Professional Low Profile Aluminum Jack
Key Specification:
  • Material: Aluminum 
  • Load Capacity: 3 ton (6000 lbs.)
  • Product Weight: 58 pounds
  • Dimensions: 31.6 x 14.5 x 7.5 inches
  • Minimum Height: 3-½ inches
  • Maximum height: 19-¼ inches
  • Piston Technology: Dual Piston
  • Color: Yellow and Black

The JEGS Professional 3-Ton Floor Jack is considered to be one of the best portable car jacks for F150. Its sheer power to lift a whopping 6000 pounds by a tool as simple as a car jack is impressive. Additionally, the aluminum construction body cannot only lift but also allow the car to remain lifted for a prolonged duration.

It comes with a double piston to provide faster vehicle lifting without putting too much stress on the jack. The grip on the handle of the jack is also comfortable enough to push down on for a few minutes without causing strain to the palm.

Its rubber padding also ensures the grip on the handle does not slip away at any time. The saddle on this jack can rotate 360 degrees easily, enabling you to work all around the inside of the car and conveniently lift it.

Moreover, the minimum height of the saddle is 3-½ inches, making it an ideal choice for vehicles that are much lower to the ground and making it naturally challenging to look underneath.

The ultra-lightweight jack weighing only 58 pounds, makes it highly convenient to store at the back of the car and use when needed.

Even with the dual-sided handles, it helps maneuver and position the jack at the right angle to ensure the vehicle is securely lifted with ease.

Good Sides:
  • Two-piece handle with sleeves
  • Rubber paddings to rest and prevent scratches and dents
  • Powerful enough to lift 6000 pounds
  • 360-degree rotatable saddles
  • Jack itself is lightweight
  • Safety valve installed to prevent overloading damage
  • Suitable for most dropped vehicles
Drawbacks:
  • It could have been more uplifting
  • Aluminum body can cause heating

3. Best Budget: Powerbuilt 640912 All-In-One Bottle Jack

Powerbuilt 640912 All-In-One Bottle Jack
Key Specification:
  • Material: Aluminum 
  • Load Capacity: 3 ton (6000 lbs.)
  • Product Weight: 22.4 pounds
  • Dimensions: 9.75 x 9.75 x 12.25 inches
  • Minimum Height: 11 inches
  • Maximum height: 21 inches
  • Color: Black

This aluminum-built 3-ton weight lifting jack is a unique one. Featuring a maximum load capacity of 3 tons, it is ideal for SUVs, trucks, and other larger vehicles.
Moreover, the Black Altrade jack holds enough power to keep your car steady and in position until you need to remove it.

Labeled as one of the best bottle jacks for F150, this jack comes with two hydraulic pistons that move in sync to ensure the motion of lifting your Ford vehicle is as smooth as possible.
These pistons allow raising your vehicle roughly 21 inches off the ground safely without any potential risk of slipping off.

With a 9x9 square base, this jack can easily carry and move around as needed. It stands about 13 inches tall, and with the safety bar attachments, it stands 18 inches high.

The broad base allows the vehicle to sit very well balanced, minimizing any possibility of going off balance. It also lets you conveniently center any car on the ground without fear. The safety bar ratchets nicely to hold the vehicle in place while you get the job done underneath the car.

That’s not all; the broad base is strong enough to lift and rest any vehicle with the proper traction and stability. Even though the expense for it might be a little higher than other jacks, it comes with some undeniable features to ensure maximum security for the vehicle lifted.

Uniqueness:
  • It supports both a unibody and regular cars
  • Security ratchets
  • It has a broad base
  • Adequate lift for most vehicles
  • Aluminum built makes it more robust
Could be Better:
  • Pretty large in height
  • Heavier than most


4. Best Heavy-Duty: Pro-Lift G-737 Grey Speedy Floor Jack

Pro-LifT G-737 Floor Jack
Key Specification:
  • Material: Alloy Steel
  • Load Capacity: 3.5 tons
  • Product Weight: 90 pounds
  • Dimensions: 30.12 x 6.89 x 15.75 inches
  • Minimum Height: 5.5 inches
  • Maximum height: 22 inches
  • Color: Grey

A very well-built, robust jack that knows precisely how to hold on and balance a vehicle on top of it with accurate precision. This strong jack can withstand prolonged hours with a heavy-duty car on top of it without any hiccups.

Since it is made of alloy steel, it only makes sense for the jack to weigh a little more than expected at 90 pounds.

The base is broad enough to conveniently balance most heavy-duty vehicles like SUVs and trucks with no problem.

The alloy steel material used in making it ensures that the cars it carries are entirely secured and free of the risk of slipping or coming crashing down and dropping.

It provides a maximum of 22-inch lift to any vehicle, which is surprisingly much more than you would expect from any jack, let alone a portable one that you can easily store away at the back of the car.

The rubber saddle allows the vehicle to sit perfectly fine and ensures it rests well. The harness allows the car to remain in place until moved and keeps it steady.

Its lever is also made of alloy steel; however, with a rubber sleeve, it is very comfortable to hold on to while you pump on it a few times.

This lever is made sure to move as smoothly as possible even though it depends on the speed you press down on the lever.

Why did it make our list?
  • Strong alloy steel material
  • Rubber sleeved handles
  • Comfortable and smooth rubber saddle
  • It has a broad base for even distribution
  • A universal joint release mechanism
  • Bypass valve installed to prevent overpumping
What are the flaws:
  • Difficult to move around and store
  • Much heavy

5. Best Durability: Aain Ht3300 3 Ton Hydraulic Floor Jack

Aain Ht3300 3 Ton Hydraulic Floor Jack
Key Specification:
  • Material: Alloy Steel
  • Load Capacity: 3 tons
  • Product Weight: 65 pounds
  • Dimensions: 29 x 14.5 x 8.2 inches
  • Minimum Height: 11 inches
  • Maximum height: 21 inches
  • Piston: Dual Pump Piston
  • Color: Blue

Powerfully made to meet all the necessary criteria to lift a sizeable heavy-duty vehicle, Aain Ht3300 is known for its durability and longevity. Made of alloy steel, this jack is incredibly well-built and minimizes any risk of causing any damage, however small it might be.

Although this jack is made for any car, this jack for F150 might be the most robust and capable jack there is. It can effortlessly lift upto 3 tons and can help you out of any situation quickly and without any professional assistance.

For a vehicle as heavy as the Ford F150, this jack can easily lift it 21 inches above the ground with ease. Although this jack is made of alloy steel, it weighs as little as 65 pounds.

That being said, this lightweight jack is not one to be feared or underestimated by any means. This jack has a board base with a dimension of 29x14.5x8.2 inches, ensuring the user a stable and secure balancing of the car.

Due to the vast space, it becomes easier to balance and center the vehicle onto the platform without posing any possible threat.

The two-piece handle on it is also highly raved about due to its Even if you allow the car to remain lifted for a little too long, you should not be able to see any significant danger to it.

Why is it special?
  • Very well-built due to the material
  • It’s pretty durable
  • Smooth functioning dual-pistons
  • It comes with rubber sleeves
  • Easily withstands 3 tons of weight
What cons did we find?
  • Difficult to store away
  • It May cause rusting when used and not cleaned on a muddy road

FAQs

1. What brand of jack is the best?

There are so many different brands of jacks to choose from and buy from. However, for the Ford F150, our best overall pick remains to be the Arcan 3-ton aluminum floor jack. With all its benefits, there is no reason to guess it second.

2. Do all jacks have broad bases?

Not all, but most jacks for heavy-duty lifting like these are usually much broader to ensure secured balancing of the car and safely parled vehicle without risking it to fall. The wide bases allow extra space on every end to distribute the vehicle's weight evenly. This also allows you some room to see what happens when the car is out for a wash.

3. Are jacks to be portable?

Most of the jacks are designed to be portable so that you can easily fit them inside your car or simply carry it somewhere. Although these jacks are compact in size, they are pretty sturdy enough to easily carry out lifting of your vehicle without a challenge.

4. What size jack should you use for F150?

To help you, we've put together a quick guide on what size jack you should use for your F150. We'll go over a few factors you'll want to keep in mind, such as the weight of your truck and the type of tires you have. With our guide, you'll be able to find the perfect jack for your needs.

Final Verdict

Although all the products mentioned are of the best quality, we’ll still recommend you to go for Arcan 3 Ton Aluminum Floor Jack. This jack is comparatively more sturdy than the others listed in this review. And it even ensures more stability during heavy-duty lifting.

Check Related Reviews:

Leave a Comment

twelve − 12 =