is reader supported. When you purchase through links on our site, we may earn an affiliate commission. Learn more.

Bottle Jack Vs Scissor Jack Comparison

The sort of jack you use should be determined by the type or manner of repair work you intend to undertake. One approach to determine this is to consider the jack's operating principle. All jacks can be classified as mechanical or hydraulic. In this regard, there are two main types of jacks.

Let's look at the bottle jack vs scissor jack comparison to ascertain which one works best for you. So, keep on reading!

Although the purpose of both these jacks is relatively the same, they are distinct in their features. Let's look at the differences between scissor jacks vs bottle jacks:

1. Versatility

Bottle jacks are multipurpose tools that can be used for a variety of tasks in addition to lifting vehicles for tire changes. It can also be used for moving cargo and machinery.

In contrast, Scissor jacks, on the other hand, are only limited to one task, and that is only to lift lightweight vehicles. This significantly puts it at a disadvantage compared to bottle jacks.

2. Stability

When compared with Scissors jacks, the bottle jack has a larger base surface. And what that does is it makes the bottle jack more stable on the ground or the supporting plate due to the weight being dispersed over a larger surface area. This attribute of bottle jacks makes it easy to hoist weights at an inclined angle.

On the other hand, scissor jacks have a diamond shape which makes them less stable due to the angled hoisting shape of the tool. This naturally makes it more susceptible to damage due to the instability.

3. Durability

The vertical mount of the bottle jack makes it sturdier and more resilient in comparison to scissor jacks. Bottle jack also has a hydraulic system which allows it to resist high pressure while supporting large loads.

On the other hand, scissor jacks are more prone to wear and tear, especially when exposed to heavyweights and lifts. 

Therefore, when hydraulic bottle jack vs scissor jack is facing off in terms of durability, bottle jacks definitely have the upper hand.

3. Height

The bottle jack has a higher lifting capacity than the scissors jack due to its vertical mount and simple design. Moreover, the bottle jack's vertical design allows it to raise the most weight to higher elevations due to the stability it provides.

On the other hand, the scissors jack's diamond form restricts it to limited lifting heights.

Benefits and Flaws of Bottle Jack

Benefits and Drawbacks of Bottle Jack

Benefits of Using Bottle Jack

The multi-faceted use of bottle jacks makes it versatile and a popular choice for most users. The benefits it provides are:

1. Lifts Heavy Loads: The sturdy design and vertical mount of bottle jacks make it the best option and the ideal tool to vertically lift substantial loads without breaking off compared to others.

2. Easy to Use and Carry: Unlike other types of jacks, bottle jacks are quite easy to use, hence making them a popular option among DIY mechanics and users. On top of that, it is a very lightweight and compact tool. Their size allows them to fit into any place without difficulty. Hence bottle jacks are an excellent choice when space is limited and you need a jack that is portable.

3. Inexpensive: Compared to other types of jacks, a bottle jack is quite affordable considering the array of uses it has. Don't be fooled by its affordability, though; just because it is cheap doesn't mean it performs poorly. In fact, it works just as efficiently as expensive ones. Therefore, bottle jacks become the best alternative to go for when on a tight budget.

Flaws of Using Bottle Jack

Even though the benefits are broad, there are still some drawbacks that can make or break when choosing this jack. The cons of bottle jacks include:

1. Challenging to Use for Low Lying Vehicles: The jack's height is a limiting factor for low-lying automobiles since it can be difficult to fit below. Therefore, a lack of ground clearance can make it impossible to use on certain vehicles. Hence making it only suitable for high clearance vehicles such as trucks.

But, we have covered for our readers in-depth guide about jacking up high-profile vehicles like a lifted truck. You may check here:

2. Increased Risk of Slipping: When lifting a vehicle, it is natural for it to shift ever so slightly. However, this could be a problem as bottle jacks usually remain stationary and are not designed to move when the vehicle moves while raised.

This substantially increases the risk of slipping while working underneath and poses a great danger to users. Therefore, as a cautionary measure, stands should be utilized for this jack when lifting vehicles. However, this may not always be achievable.

Benefits and Flaws of Scissor Jack

Benefits and Drawbacks of Scissor Jack

Benefits of Using Scissor Jack

Let's look at the benefits scissor jacks can offer before making a decision, shall we? The pros of using scissor jacks include:

1. Lightweight and Portable: Similar to its counterpart, scissor jacks are also very lightweight and portable. This makes it a convenient tool to carry around without any help from anyone else.

2. Cheap Maintenance: Washing and oiling are the only maintenance required for this jack, making it cheaper than the rest of the tools in terms of maintenance costs.

Note: If you're looking for information on how safe are using a scissor jack, Check this guide:

Flaws of Using Scissor Jack

Just like any other tool, there are drawbacks as well. The cons of using scissor jacks are:

1. Slow to Operate: The structure of scissor jacks requires you to tighten or loosen the screw knob to elevate or lower the jack using a handle. However, this can take some time to get to the desired height.

2. Unable to Lift Heavyweight: Its diamond-shaped structure poses a disadvantage for the users. Because the diamond structure of scissor jacks does not support heavy weights.

3. Wears Out Quicker: In reference to the previous point, the structure of scissor jacks makes them more prone to damage and wears quicker than any other jacks. This is mainly due to the lack of durability connected with its diamond shape and structure.

Prolonged use in lifting heavy weights makes it susceptible to a quicker wear.

So, Bottle Vs Scissor Jack: Which One Is the Topper?

Now that we have explored the pros and cons and have a clear picture of what both of these jacks have to offer, we can finally choose a topper.

When weighing the benefits and drawbacks, evidence points towards bottle jack being the better alternative among the two. So, the question arises – Are Bottle Jacks Better Than Scissor Jacks?

The answer is yes, they are. Bottle jacks are much more resilient and durable when it comes to lifting heavy weights as opposed to scissor jacks.

Not to mention bottle jacks are versatile tools and can be used for other purposes as well, whereas scissor jacks tend to be limited in their use.

Which One Is the Topper Bottle Jack or Scissor Jack

Wrapping Up!

There you have it! Now that you have a detailed account and answer to the debate on bottle jack vs scissor jack, you can finally make a decision. You can now choose a jack that is best suited to your needs.

If you are looking for versatility, the bottle jack is the one for you. If you're looking for a simple and portable jack that gets the job done for maintenance, then the car scissor jacks are the excellent choice. 

However, based on empirical evidence in terms of pros and cons, the bottle jack is the clear winner.

Related Comparison You May Go Through:

Leave a Comment

18 − seven =