Have you ever found yourself in a situation where you needed to jack up a tractor but didn't know how? Don't worry, we’re here to help.
You'd be surprised to know that most people who jack their tractor up do it in the wrong way.
In this article, we will go over the basics of how to jack up a tractor. So, if you're ready, let's get started!
Jump To Contents
What Should You Do Before You Jack Up a Tractor?
Here are some of the things that you must ensure before jacking the tractor up. These are given as follows.
1. Ensure That the Spare Fits the Tractor Perfectly
Ensuring that the spare tire fits the tractor perfectly is important for many reasons.
For one, it helps to prevent the tire from coming loose and causing an accident. Additionally, it can help to improve fuel efficiency by reducing drag on the tractor.
Finally, it helps to extend the life of the tire by preventing it from being overworked.
There are a few simple ways to ensure that the spare tire fits the tractor perfectly. First, make sure that the spare tire is the correct size for the tractor.
Second, check that the spare tire is properly inflated. Third, and most importantly, make sure that the lug nuts are tightened securely.
By taking these simple steps, you can help to keep yourself and your tractor safe on the road.
2. Take Out the Tractor’s Spare Tire
Keep the tractor's spare tire nearby before you jack the vehicle up. This will save you some time and also some hassle.
3. Loosen All the Lug Nuts
Most tractor lug nuts are tightened to between 80 and 100 foot-pounds of torque.
That's a lot of torque, and it can be difficult to loosen the lug nuts if you don't have the right tools. The first step is to ensure that you have a lug wrench that fits the tractor's lug nuts.
Once you have that, position it on the nut and apply outward pressure. You may need to use both hands. If the nut is still very tight, you can try using a power drill with an impact socket attachment.
Be careful not to overdo it, or you could damage the threads on the nut.
5 Steps To Jack Up A Lawn Tractor
Here are some of the steps that you must follow for jacking up a tractor.
Step 1: Check the Surface
Any time you need to jack up a tractor, it's important to choose the right surface to set the jack on. You'll want to pick a flat surface that is firm and level. Pavement, concrete, or compacted gravel are all good choices.
Stay away from soft surfaces like grass or sand, which could cause the jack to sink or collapse. It's also important to make sure the area around the jack is clear of debris.
Step 2: Find Jack Points
Jacking up the tractor from the wrong location can cause serious damage, which is why it's important to find the proper points.
The jack points on a tractor are usually found located near the wheels. If you fail to find them, you should check the owner's manual for the specific location.

Step 3: Chock Wheels
Chocking the wheels is a critical step in the jacking process. If chocks are not used, the tractor can slip off the jack and cause serious damage. The chocks should be placed on the opposite side of the tractor from the direction you will be jacking it up.
For example, if you are jacking up the front of the tractor, place chocks on the rear wheels. Likewise, if you are jacking up the rear of the tractor, chocks should be placed on the front wheels.
Step 4: Position the Jack
Before using the jack, make sure it is in the correct position. The handle should be facing the ground, and the pump should be on the side closest to the wheel. If the handle is in the wrong position, it will be difficult to pump and could cause the jack to collapse.
Once the handle is in the correct position, insert the end of the handle into the square opening on the top of the jack.
Make sure that the handle is in so that it locks into place. Now you are ready to start pumping.

Hold onto the handle with both hands and use a steady up-and-down motion to start lifting the car. It is important to pump slowly at first so that you don't overshoot your desired height. Once you reach your desired height, stop pumping and check to make sure that the car is stable before getting underneath it.
Step 5: Finish
When you jack up a vehicle, you're raising it off the ground so that you can work on it. But once you're finished, you need to know how to safely bring the vehicle back down.
First, make sure that the valve on the jack is fully open. Then, place chocks under the wheels to prevent the vehicle from rolling. Finally, lower the jack slowly and evenly until the vehicle is back on the ground.
Once the vehicle is down, remove the chocks and double-check that everything is secure before you begin driving again. By following these simple steps, you can ensure that your vehicle is safe and roadworthy.
Final Verdict
Now that you know how to jack up a tractor get out there and work on those fields. Just be sure to take the necessary precautions and safety measures when doing so – it’s better to be safe than sorry.
And if you still have any questions or concerns, feel free to reach out to us for more information. We hope you found this post helpful, and we can’t wait to see your tractors in action!
Relevant Jacking Guide: