Whether you plan on working on brakes or executing any other assignment beneath your car then you must lift the vehicle. That's when the requirement of a jack would bother you. And the obvious fact you would run back and forth to know is what size jack stands do I need?
The answer depends on the job you intend to do with the jack stand. The most popular demands are holding the vehicle up, storing rear ends or supporting exhaust etc. For those, you would need 2-ton stand. And a 3-ton jack stand mostly for medium size cars. If you plan on going under the vehicles then you need a 6-ton, large SUVs and light duty trucks are good to go with that size. Doing heavy appeals with a truck required a 12-ton jack stand.
However, if you want to learn more about the whole fact keep scrolling down.
Jump To Contents
- What Are The Size Variations Of A Jack Stand?
- What Size Jack Stand Do I Need For A Jeep?
- Is A 2-ton Jack Stand Enough For A truck?
- What Size Jack Stands Do I Need an F150?
- How Much Weight Will A Ton Jack Stand Hold?
- Top-Notch Jack Stands In The Market
- How To Choose A Jack Stand For Your Car, Truck, or SUV?
- Final Words
What Are The Size Variations Of A Jack Stand?
When you go out for jack stand shopping, you will meet a lot of variations. You might not catch everything up instantly for deciding on the right size for the jack stand. So, why don’t we give you the knowledge beforehand and put you in a stable situation? Check out this chart!
Size of Vehicle | Jack Stands Size |
|---|---|
Small Light Vehicle | 2-ton (4000 pounds) |
Medium to Large Vehicle | 2-ton (4000 pounds) |
Truck or Large SUV | 5 or 6 ton (10000 or 12 pounds) |
What Size Jack Stand Do I Need For A Jeep?
A 6-ton jack stand works fine in most cases with jeeps. If you’re thinking about taking your wheels off then there's no requirement for a jack stand over 6-ton. For travelling, using a 6-ton stand is very convenient.
Because changing a punctured tire is possible with that size. But when you plan on lifting your jeep, you should turn to a 12-ton jack stand for being on the safe side.
Is A 2-ton Jack Stand Enough For A truck?
We find the 2-ton jack stand most suitable for lifting small cars or sedans. For raising a corner of medium size vehicles this size ton is safe. But for lifting a truck or large SUV you can’t rely on a 2-ton stand.
You at least need twice as powerful as a 2-ton jack stand to deal with a truck. For a truck, you should get a 5 or 6-ton jack stand so that you can work safely. A light jack stand would never be able to tolerate the weight of a truck. Don’t try doing so unless you want to end up with something worse.
What Size Jack Stands Do I Need an F150?
If you go through the experience of an F150 user then you will find out the stand size requirement of F150. F150 light-duty trucks can be lifted with a 3-ton jack. Some might suggest you use a 4 ton or 6-ton one.
But the size will certainly vary depending on the model and card weight you’re using.
You must figure out the right size for the following vehicle. Using a 2-ton stand won’t be able to tolerate the weight of the truck.
God forbid, but you might end up in a deadly situation in that case. So you must be careful.
How Much Weight Will A Ton Jack Stand Hold?
The weight capacity of the jack stand entirely depends on the size. If you look around a bit, you will find the reckoning simple.
A 2-ton jack stand is designed to lift 4000 pounds weight. A 3-ton can lift 6000 pounds.
On the other hand, for heavier jobs like lifting trucks you need a 5-6 ton jack stand. They can work with 10000 to 120000 weight vehicles.
People who drive large SUVs or trucks need that size and weight capacity the most.
Top-Notch Jack Stands In The Market
BIG RED T42202 2 Ton Jack Stands
Vehicle Service: Car, SUVs and Trucks
- Brand: BIG RED
- Material: Alloy Steel
- Min-Lifting Capacity: 10.81 inches
- Max-Lifting Capacity: 16.53 Inches
- Weight: 11.25 pounds
- Large saddle surface area
- Sawtooth ratchet bar
BIG RED T43004 3 Ton Jack Stands
Vehicle Service: Car, UTV, ATV & small vehicle
- Brand: BIG RED
- Material: Alloy Steel & Aluminum
- Min-Lifting Capacity: 10.75 inches
- Max-Lifting Capacity: 15.63 Inches
- Weight: 10.2 pounds
- Wide foot base and large saddle surface area
Pro-Lift 6 Ton Jack Stands
Vehicle Service: Car, SUVs and small trucks
- Brand: Pro-Lift
- Material: Alloy Steel
- Min-Lifting Capacity: 16 Inches
- Max-Lifting Capacity: 23.5 Inches
- Weight: 26.4 Pounds
- Double locks with handle locks and mobility pin
- Large saddle surface area
- High quality cast ductile iron ratchet bar
How To Choose A Jack Stand For Your Car, Truck, or SUV?
In the market, here are a lot of jack stands available. But do you know how you should choose the jack stand? Among many varieties a few specifications make the right one for your vehicle stand out. Let us bring those certainties to you.
Based on Reach
If you have an SUV or a truck, you must ensure the reach of the truck. Because for those vehicles you need maximum height reach. Some jacks might offer you an extension adapter, without that benefit a stand without reasonable height reach is as good as a useless scrap.
Based on Weight
Most SUVs or trucks would hit the scale between 2000 and 2500 kg on average. For that weight, you can easily rely on a 4-6 ton stand. But there is something that you should know. Smaller jobs won’t require maximum weight capacity from the stand. Unless you want to lift your vehicle's overall weight, you can do fine with a 2 or 3-ton stand.
Based on Clearance
People who drive lowered cars are most in need of clearance. Among many varieties, there are some low-profile jacks stand available that are not more than 2-3 inches tall. As a result the handily roll under your lowered car. If the regular jack stands don’t feed your requirements, try this tip from us and you’re good to go even with a lowered vehicle.
Final Words
We’ve news for you, selecting a jack stand is not easy deal. The whole thing requires thinking about safety standards, size, value for money, user's experience, weight and height capacity thoroughly. But before anything you need to be 100% sure about the size of jack stand you need. So, what size jack stands do I need?
That’s what we discussed with all potential requirements above. Although there’s no specific answer to this question, our guide can help you with the appropriate knowledge and in the end, you’ll be the one who has the answer to your question.
Helpful Guide on Jack Stands:
